We give power to you!
8 Boulevard Park, Bellville,
South Africa
Mon-Thur: 08:00 - 17:00 / Fri: 08:00 - 16:00

Accessories & Equipment

Tyre inflators, spray guns, sandblasting guns, rubberizing guns, air cleaning guns, paraffin cleaning guns, air-water cleaning guns, silicone pneumatic guns, and much more.

Tyre inflators:

Tyre inflators are instruments and if not handled with care, you will not get an accurate reading.

Low pressure or internal mix spray gun:

The low-pressure spray gun puts pressure on the liquid and pushes the liquid into the air stream. The liquid and compressed air mixes inside the nozzle and blows through the nozzle under pressure. This gun is also called an internal mixed spray gun. An advantage of this gun, if left standing for a while and the thick paint settles at the bottom of the pot, you can jump in with a stirrer and remix the paint. A disadvantage is that the work goes slow and you must clean the nozzle regularly. You can also blow the bottom of the paint pot if you apply too high pressure on the gun.

High pressure suction and gravity feed spray guns:

The high-pressure spray gun or suction feed gun blows the compressed air through a venturi. The venturi sucks the liquid up. the liquid and compressed air mix in front of the nozzle. This gun is also called an external mix spray gun. To get enough suction on the venturi to suck the paint up to the nozzle, you use higher pressure. This may cause more overspray and dust. This is why there is a gravity feed spray gun. It works exactly the same as the high-pressure gun, but the liquid is in a pot on top of the gun and the liquid flows into the nozzle with gravity.

With this gun, you can spray at very low pressures and with very little overspray and dust. The disadvantages of this gun are, you need a special stand to put it down and if you leave the gun too long, the thick paint drops to the bottom into the nozzle. You must clean the gun before you can spray again. You cannot use this gun to spray upside down. The advantage of the suction feed gun is if you leave it standing for a while and the thick paint settles at the bottom of the pot, you can jump in with a stirrer and remix the paint.

View our products and request a quote now!